/***********************************************************************************************************************
* DISCLAIMER
* This software is supplied by Renesas Electronics Corporation and is only 
* intended for use with Renesas products. No other uses are authorized. This 
* software is owned by Renesas Electronics Corporation and is protected under 
* all applicable laws, including copyright laws.
* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING 
* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT 
* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE 
* AND NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS 
* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE 
* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR 
* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE 
* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* Renesas reserves the right, without notice, to make changes to this software 
* and to discontinue the availability of this software.  By using this software, 
* you agree to the additional terms and conditions found by accessing the 
* following link:
* http://www.renesas.com/disclaimer
*
* Copyright (C) 2011, 2012 Renesas Electronics Corporation. All rights reserved.
***********************************************************************************************************************/

/***********************************************************************************************************************
* File Name    : r_main.c
* Version      : CodeGenerator for RL78/G13 V1.03.03.05 [10 Sep 2012]
* Device(s)    : R5F100LC
* Tool-Chain   : CA78K0R
* Description  : This file implements main function.
* Creation Date: 2013/01/10
***********************************************************************************************************************/

/***********************************************************************************************************************
Pragma directive
***********************************************************************************************************************/
/* Start user code for pragma. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */

/***********************************************************************************************************************
Includes
***********************************************************************************************************************/
#include "r_cg_macrodriver.h"
#include "r_cg_cgc.h"
#include "r_cg_serial.h"
/* Start user code for include. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */
#include "r_cg_userdefine.h"

/***********************************************************************************************************************
Global variables and functions
***********************************************************************************************************************/
/* Start user code for global. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */
void R_MAIN_UserInit(void);
/***********************************************************************************************************************
* Function Name: main
* Description  : This function implements main function.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void put_message(unsigned char *);
void main(void)
{
    uint8_t  const rtx_buf;

    R_MAIN_UserInit();
    
    /* Start user code. Do not edit comment generated here */
    R_SAU0_Create();
    R_UART1_Start();

    put_message("RL78/G13 Connected OK >");

    while (1U){         
        while((SSR03 & 0x0040)== 0){        //Check TSF03 (Recive)
            R_UART1_Receive(&rtx_buf,(uint16_t)1); 
        }     
        while((SSR03 & 0x0040)!= 0);        //Check TSF03 (Recive)

        while((SSR02 & 0x0040)!= 0);        //Check TSF02 (Send)
        R_UART1_Send(&rtx_buf,(uint16_t)1);
    }
    /* End user code. Do not edit comment generated here */
}
void put_message(unsigned char *message)
{    
    while(*message != 0x00){        
        while((SSR02 & 0x0040)!= 0);         //Check TSF02 (Send)
        R_UART1_Send((uint8_t  const *)message,(uint16_t)1);
        message++;
    }	    
}

/***********************************************************************************************************************
* Function Name: R_MAIN_UserInit
* Description  : This function adds user code before implementing main function.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_MAIN_UserInit(void)
{
    /* Start user code. Do not edit comment generated here */
    EI();
    /* End user code. Do not edit comment generated here */
}

/* Start user code for adding. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */